FREE GLOBAL SHIPPING
NEW DIALS OUT NOW
24 MONTHS WARRANTY
PLYMOUTH PISTACHIO BACK ON PRE-SALE

What Is a Hacking Movement Watch, and Why Does It Matter?

What is a hacking movement? Why the seconds hand stops when you pull the crown, how to set a watch to the second, and how to check if yours hacks.

A close up of the DeMarco Ironside 200 Harbor Blue dial and its red tipped seconds hand, the hand a hacking movement stops when the crown is pulled
Written by
Mike Demarco
Published on
November 21, 2026

A hacking movement is a mechanical watch movement that stops the seconds hand when you pull the crown out to set the time. Because the seconds hand waits for you, you can set the watch to the exact second and start it again on cue. Without hacking, the seconds hand keeps sweeping while you set the hands, and the best you can do is get close.

It sounds like a small thing, and in daily wear it mostly is. But it is one of the clearest signs of what kind of movement is inside a watch, and it makes owning a mechanical watch a little more satisfying.

Where the Name Comes From

The usual story is military. Soldiers and pilots needed their watches to agree to the second before an operation, so someone would call out a time, everyone would pull their crowns to stop their watches, and on the word "hack" they would push them in together. Whether or not every detail of that story is true, the name stuck, and a watch that can be stopped this way is still said to "hack."

How It Works

Inside a mechanical watch, the balance wheel swings back and forth thousands of times an hour, and that steady swing is what keeps time. A hacking movement has a small lever linked to the crown. When you pull the crown out to the time setting position, the lever touches the balance wheel and holds it still. The whole gear train stops with it, and so does the seconds hand.

Push the crown back in and the lever lets go. The balance starts swinging again and the watch carries on running from where it stopped.

Nothing is wound down or reset by doing this. The mainspring keeps its power the whole time, so stopping the watch for a minute while you set it costs you nothing.

How to Set a Watch to the Second

This is the part that makes hacking worth having. Every Ironside 200, the new stone dial models included, uses a Miyota 9015 automatic movement with hacking. On any of them it goes like this.

1. Unscrew the crown by turning it counterclockwise until it pops free. 2. Pull it all the way out to the third position. The seconds hand stops. 3. Turn the crown to move the hands, and stop the minute hand exactly on a minute marker. 4. Watch a reference clock, such as the time on your phone. When it reaches the top of that minute, push the crown back in. The watch starts with the seconds exactly right. 5. Screw the crown fully down. The 200m water rating depends on it.

If the watch has stopped, wind it 20 to 30 turns first. Our guide to hand winding an automatic watch explains why it pays to wind before you set.

How to Tell If Your Watch Hacks

Pull the crown out to the time setting position and look at the seconds hand. If it stops, the movement hacks. If it keeps going, it does not.

Many entry level automatic movements do not hack. That does not make them bad watches. It does mean you set them by waiting for the seconds hand to come round to twelve and making your best guess. Some owners try to stall a non hacking watch by turning the hands backward, a trick called back hacking. It is best avoided, because it puts strain on parts that were never meant to take it.

Why It Matters on a Dive Watch

On a dive watch, timing is the whole idea. The rotating bezel measures elapsed minutes, and it is easier to trust when the watch underneath it is set precisely. A movement that hacks, winds by hand and runs at 28,800 beats an hour, as the Miyota 9015 does, is built for that kind of use. We go further into what the specification means in the Miyota 9015 explained, and into the bezel in how to use a dive watch bezel.

On the Ironside 200 you can watch it all happen. The sapphire display caseback shows the movement and our custom rotor at work.

See the Ironside 200 collection, or get in touch through our contact page with any question about the movement.

GET EARLY ACCESS & EXCLUSIVE OFFERS

Early access to new releases, exclusive offers, and limited stock alerts.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.